Difference between revisions of "Nucleo Boards"
From RobolaboWiki
| Line 27: | Line 27: | ||
cd build/Release | cd build/Release | ||
sudo make install | sudo make install | ||
| − | < | + | </pre> |
Revision as of 08:10, 29 July 2019
Configuring environment
Linux
Installing dependencies
To install dependencies for STM32CubeMX and STM32CubeIDE, in a command line, execute:
sudo apt-get install build-essential gcc-arm-none-eabi libnewlib-arm-none-eabi libstdc++-arm-none-eabi-newlib
To install dependencies for flashing the microcontroller, in a command line, execute:
sudo apt-get install git cmake libusb-1.0-0-dev dfu-util
To install dependencies for debugging the microcontroller, in a command line, execute:
sudo apt-get install gdb
Moreover, stlink utility is mandatory to debug in a nucleo board, therefore in a command line, execute:
git clone https://github.com/texane/stlink.git cd stlink make cd build/Release sudo make install
