Nucleo Boards

Configuring environment

Linux

Installing dependencies

Dependencies for compilling

In a command line, execute:

sudo apt-get install build-essential gcc-arm-none-eabi libnewlib-arm-none-eabi libstdc++-arm-none-eabi-newlib

Dependencies for flashing the microcontroller

In a command line, execute:

sudo apt-get install git cmake libusb-1.0-0-dev dfu-util

Dependencies for debugging the microcontroller

In a command line, execute:

sudo apt-get install gdb

Moreover, stlink utility is mandatory to debug in a nucleo board. In a command line, execute:

git clone https://github.com/texane/stlink.git
cd stlink
make
cd build/Release
sudo make install

Installing STM32CubeIDE

Last release of STM32CubeIDE can be obtained here: https://www.st.com/en/development-tools/stm32cubeide.html.
For Debian like distributions (e.g. ubuntu), download the STM32CubeIDE-DEB file. To download it, you will need to provide name and a valid email address.

Unzip the file (e.g. <FILE> = en.st-stm32cubeide_1.0.1_3139_20190612_1256_amd64.deb_bundle)

unzip <FILE>.sh.zip

It will generate a .sh file. Give it permits for execution.

chmod 777 <FILE>.sh

Finally, execute the installation

sudo ./<FILE>.sh

References

https://nebkelectronics.wordpress.com/2016/12/19/the-stm32cube-library-part-1-toolchain/
https://nebkelectronics.wordpress.com/2016/12/24/stm32cube-library-part-2-hello-world/
https://nebkelectronics.wordpress.com/2017/10/08/stm32cube-library-part-3-compiling/

Windows

Installing STM32CubeIDE

Last release of STM32CubeIDE can be obtained here: https://www.st.com/en/development-tools/stm32cubeide.html. .
For Windows like distributions, download the STM32CubeIDE-Win file. To download it, you will need to provide name and a valid email address.

Unzip the file and execute the binary. Follow all steps and accept all conditions.