Nucleo Boards

Configuring environment

Linux

Installing dependencies

To install dependencies for STM32CubeMX and STM32CubeIDE, in a command line, execute:

sudo apt-get install build-essential gcc-arm-none-eabi libnewlib-arm-none-eabi libstdc++-arm-none-eabi-newlib

To install dependencies for flashing the microcontroller, in a command line, execute:

sudo apt-get install git cmake libusb-1.0-0-dev dfu-util

To install dependencies for debugging the microcontroller, in a command line, execute:

sudo apt-get install gdb

Moreover, stlink utility is mandatory to debug in a nucleo board, therefore in a command line, execute:

git clone https://github.com/texane/stlink.git
cd stlink
make
cd build/Release
sudo make install
<\pre>



<h2> Windows </h2>
<h2> MAC </h2>