PhantomX Reactor Robot

Configuring the environment

Setting up the Arduino Software

• Download the Arduino IDE 1.6.x according to your operating system from: https://www.arduino.cc/en/Main/Software .
• Install the Arduino IDE
• If you have chosen to download the installer, run the installer and install the software in a path of your convenience.
• If you have chosen to download the sources (Linux or zip on Windows), uncompress the software in a path of your convenience
• Open/run the arduino IDE so it will create all the folders needed

Installing Tools and Libraries

Download the robot libraries from: here .

Hello World example

Downloading the code to the robot

Installing FTDI drivers

If you are using Linux or Mac, skip this step. If you are using Windows, power up the robot and connect it to your computer. Windows should ask you to install some FTDI drivers to be able to connect to the robot.