Revision as of 07:28, 29 July 2019

Configuring environment

Linux

Installing dependencies

Dependencies for compilling

In a command line, execute:

sudo apt-get install build-essential gcc-arm-none-eabi libnewlib-arm-none-eabi libstdc++-arm-none-eabi-newlib

Dependencies for flashing the microcontroller

In a command line, execute:

sudo apt-get install git cmake libusb-1.0-0-dev dfu-util

Dependencies for debugging the microcontroller

In a command line, execute:

sudo apt-get install gdb

Moreover, stlink utility is mandatory to debug in a nucleo board. In a command line, execute:

git clone https://github.com/texane/stlink.git
cd stlink
make
cd build/Release
sudo make install

Installing STM32CubeIDE

Last release of STM32CubeIDE can be obtained here: https://www.st.com/en/development-tools/stm32cubeide.html
For Debian like (e.g. ubuntu) distributions download the STM32CubeIDE-DEB file.

Unzip the file

unzip <FILE>.zip

It will generate a .sh file. Give it permits for execution.

chmod 777 <FILE>.sh

Finally, execute the installation

sudo ./<FILE>.sh

References

https://nebkelectronics.wordpress.com/2016/12/19/the-stm32cube-library-part-1-toolchain/
https://nebkelectronics.wordpress.com/2016/12/24/stm32cube-library-part-2-hello-world/
https://nebkelectronics.wordpress.com/2017/10/08/stm32cube-library-part-3-compiling/

Windows

MAC